Honda Motorcycle CBR250R Sports bike

The CBR250 series of Entry level sports motorcycles was produced by Honda between 1986 and 1996. It is a lightweight sport bike with a six-speed gearbox and a 250 cc  four-cylinder, four-stroke engine capable of revving up to 19,000 rpm. In 2011, Honda introduced the completely new CBR250R with a lower-revving, single-cylinder engine which revs up to 10,500 rpm, made in Thailand and marketed worldwide.

Complete Specifications

Dimensions:

Length: 2030mm
Width: 709mm
Height: 1127mm
Wheelbase: 1369mm
Seat Height: 784mm
Ground Clearance: 148mm
Rake: 25°
Trail: 95 mm

Engine Type: 4 stroke, DOHC 4-valve, water cooled
Displacement: 249.4CC

Bore x Stroke: 76 x 55 mm
Compression ratio: 10.7 : 1
Maximum power: 26. 2 bhp (18.7 kilowatts) @8500 rpm (95/1/EC)
Maximum Torque: 22.9 Nm @7,000 rpm (95/1/EC)
Carburetion: Electronic Fuel Injection PGM-FI
Diameter of the venture: 38MM

Electricals

Start Electric
Battery 12V/ 6AH
Headlight 55/60 watts
Chassis Frame Type: Double beam type steel tube (Diamond frame)
Kerb Weight: 161 KG/ 165 (C-ABS version)
Fuel Tank: 13 liter

Rim Front 17 M / C × MT 2.75
Rear 17 M / C × MT 4.00
Tire Front 110/70 ×17M / C
Rear 140/70 × 17M / C
Suspension Front telescopic fork, 37 mm, 130 mm travel
Rear Pro-Link Monoshock, 104 mm travel
Brake: Front Hydraulic disc 296 x 4.5 mm with 2-piston caliper and resin pads
Rear hydraulic disc 220 x 5 mm with single piston caliper and resin pads

Ignition: Transistorized with electronic advance
Transmission: Clutch: Wet multiplate with coil springs
Gearbox: Constant mesh 6-speed return
Final Reduction: Ring Chain
Final Drive: Chain
Training: Mechanical cable
Primary reduction 2.808
Final reduction 2.714